Differences between revisions 1 and 8 (spanning 7 versions) Back to page
Revision 1 as of 10:23AM, Mar 06, 2014
Size: 44
Editor: Sam
Comment:
Revision 8 as of 10:46AM, Mar 06, 2014
Size: 1937
Editor: Sam
Comment:
Deletions are marked like this. Additions are marked like this.
Line 2: Line 2:

== Thin film interference ==

Consider two identical microscopic slides in air illuminated with light from a laser. The bottom slide is rotated upward so that the wedge angle gets a bit smaller. What happens to the interference fringes?

<<c>> <<lia(slides_1.png, align = center, width = 33%)>> <<c(1)>>

 A. spaced farther apart
 A. spaced closer together
 A. no change

== Thin film interference ==

Two identical microscope slides in air illuminated with light from a
laser are creating an interference pattern. The space between the slides is now filled with water (n = 1.33). What happens to the interference fringes?

<<c>> <<lia(slides_2.png, align = center, width = 33%)>> <<c(1)>>

 A. spaced farther apart
 A. spaced closer together
 A. no change

== Diffraction ==

The diffraction pattern below arises from a single slit. If we would like
to sharpen the pattern, i.e., make the central bright spot narrower, what should we do to the slit width?

<<c>> <<lia(single_slit.png, align = center, width = 33%)>> <<c(1)>>

 A. narrow the slit
 A. widen the slit
 A. enlarge the screen
 A. close off the slit

== Diffraction ==

Imagine holding a circular disk in a beam of monochromatic light. Diffraction occurs at the edge of the disk. The center of the shadow is

<<c>> <<lia(shadow.png, align = center, width = 33%)>> <<c(1)>>

 A. darker than the rest of the shadow
 A. a bright spot
 A. bright or dark, depending on the wavelength
 A. bright or dark, depending on the distance to the screen

== Diffraction? ==

Consider a beam of coherent monochromatic light, like a pencil shaped beam of a laser. At a certain time and position, the beam shape is a perfect circle of diameter D. However, it is moving in free space. Will this beam show a diffraction pattern at a screen some distance away later on?

 A. Yes, sure.
 A. No way.

Lecture 17: Chapter 35 (Diffraction)

Thin film interference

Consider two identical microscopic slides in air illuminated with light from a laser. The bottom slide is rotated upward so that the wedge angle gets a bit smaller. What happens to the interference fringes?

Inlined image: slides_1.png
  1. spaced farther apart
  2. spaced closer together
  3. no change

Thin film interference

Two identical microscope slides in air illuminated with light from a laser are creating an interference pattern. The space between the slides is now filled with water (n = 1.33). What happens to the interference fringes?

Inlined image: slides_2.png
  1. spaced farther apart
  2. spaced closer together
  3. no change

Diffraction

The diffraction pattern below arises from a single slit. If we would like to sharpen the pattern, i.e., make the central bright spot narrower, what should we do to the slit width?

Inlined image: single_slit.png
  1. narrow the slit
  2. widen the slit
  3. enlarge the screen
  4. close off the slit

Diffraction

Imagine holding a circular disk in a beam of monochromatic light. Diffraction occurs at the edge of the disk. The center of the shadow is

Inlined image: shadow.png
  1. darker than the rest of the shadow
  2. a bright spot
  3. bright or dark, depending on the wavelength
  4. bright or dark, depending on the distance to the screen

Diffraction?

Consider a beam of coherent monochromatic light, like a pencil shaped beam of a laser. At a certain time and position, the beam shape is a perfect circle of diameter D. However, it is moving in free space. Will this beam show a diffraction pattern at a screen some distance away later on?

  1. Yes, sure.
  2. No way.